The CRONEX High Pressure Cone (3/4" x 1/4") Control or regulate water flow - CRX0052

CRONEX High Pressure Cone, 3/4 x 1/4 Inch, A small internal valve piece that helps control and seal water flow in high-pressure plumbing, replacing older brass components - CRX0052

Product Description:

The CRONEX High Pressure Cone (3/4" x 1/4") is a small plumbing part used inside high-pressure water valves or fittings, often in systems like showers, bidets, or supply lines.

What it’s used for

This piece acts as a replacement internal component (instead of brass parts like the stem/valve). Its job is to:

• Control or regulate water flow
• Help seal the valve to prevent leaks under pressure
• Fit between different connection sizes (3/4 inch to 1/4 inch)

You’ll typically find it in:

• Shower valves
• Toilet/bidet spray lines
• Small high-pressure water control fittings

What “3/4 x 1/4 inch” means

• One side fits a 3/4-inch connection (common water supply size)
• The other fits a 1/4-inch outlet (smaller tubing or fitting)

How to connect / install it

This isn’t usually a standalone connector—you install it inside a valve or fitting. General steps:

1. Turn off the water supply
   Always shut off water before working.
2. Open the valve or fitting
   Unscrew the existing connector or valve housing where the old brass stem/valve is.
3. Remove the old part
   Take out the worn brass cone/stem/valve.
4. Insert the CRONEX cone
   • Place it in the same orientation as the old piece
   • The cone shape usually points toward the water flow or sealing seat
5. Reconnect fittings
   • Attach the 3/4" side to the main supply
   • Attach the 1/4" side to the smaller outlet line
   • Tighten securely (hand-tight + slight wrench turn, don’t overtighten)
6. Turn water back on and test
   Check for leaks and proper flow.

Item Number: CRX0052